Welcome To Vacdepot On-Line
www.vacdepot.info
DIY VACUUM CLEANER SYSTEMS
  You Can Do It. We Can Help..
Home Aggresor Vacuums Smart Performer Pro Power Unit AGG-A11

Order the Aggresor Vacuums AGG-A11 On Vacdepot!

Aggresor Vacuums Smart Performer Pro Power Unit
Aggresor Central Vacuum Systems are built-in cleaning appliances which vacuum your home and improve indoor air quality at the same time. Aggresor Systems deliver powerful cleaning and allergy relief by removing 100% of vacuumed dirt, dust mites, pollen, dander and other allergens from living areas. The Aggresor A11 Smart Performance Pro Power Unit is the strongest and smartest unit in the four model series of Aggresor central vacuums. With 640 airwatts of cleaning power the AGG-A11 has ample performance for cleaning, with a manufacturers suggested 12,000 square feet maximum size home.

The AGG-A11 is as intelligent as it is powerful with quiet low noise engineering, user selectable bagless or bagged collection system and a built in control system that gives it's operator information about the systems performance and health. Part of Electrolux's intelligent series power units, the AGG-A11 systems will monitor the motors condition, calculate and display airflow performance information and also the amount of debris fill in the collection bin or disposable bag. The intelligent control system even tracks the total vacuum usage and alerts the operator about normal service intervals for the filter and motor system. The Aggresor A11 is an excellent vacuum for new home installations or those looking to replace their old power unit with a smart & powerful vacuum. Much more information is available by viewing the Detail Review.

AGGRESOR AGG-A11 POWER UNIT SPECIFICATIONS & FEATURES
  • Central Vacuum Power Unit
  • Upto 12,000 sqft Cleaning (Mfg. Sug)
  • 2 Stage 15. Amp 120V Ametek Premier Motor
    • By-Pass 7.2" Tangential Exhaust Design
    • 126 Cubic Feet / Minute Airflow
    • 137 Inches / Water Lift Suction
    • 640 Max Air Watts
  • Electrolux Control System
  • Message Center LCD Display
  • Detachable 6ft Power Cord
  • LED Power Indicator
  • Voltage & Thermal Overload Reset
  • Manual Override On Switch
  • Bagless and Bagged Collection Option
  • 8 Gallon Bin Capacity
  • Transparent Window Collection Bin
  • Twist-Lock Bin Connection
  • Self Regulating Permanent Filter
  • Triumph HEPA Filter Material
  • Hygenic Disposable Bag System Optional
  • Sound-Off Exhaust Muffler Included
  • Muffler Connection's Included
  • Right-Side Exhaust (down or up)
  • Right-Side Intake System
  • Low Noise 61dBa Design
  • Air Noise and Vibration Reduction System
  • Metal Mounting Plate w/screws
  • 100% Valox Chassis
  • Built-in Scratch Resistant Color
  • Black Powder Color
  • 32lbs Total Weight
  • 38.5" High, 14" Diameter
  • OEM Model CV7520A, P/N 008442
  • Vacdepot, Electrolux Authorized Dealer

Aggresor A11 Central Vacuum Power Unit Aggresor central vacuum systems are manufactured by Electrolux Home Care Products, North America (EHCPNA) in the Juarez production facility. Electrolux is the worlds largest central vacuum supplier with products in many brands including Eureka, BEAM, Honeywell, Volta (Europe), Electrolux (USA & Europe) as well as many other brands. The Aggresor central vacuum chassis of the AGG-A11 made from VALOX resin is a break through in central vacuum design that allows for quality exacting designs with superior high impact performance, fatigue resistance, chemical resistance, scratch resistance and heat resistance.

The enhanced design freedom of precision manufacturing in VALOX resin allows for inherent benefits over sheet metal canisters including electronic insulation, lower noise & vibration, built-in color system, reduced weight, and rust proof construction. VALOX resins are also an environmentally wise choice for both production and recycling. The Aggresor vacuum chassis was instantly popular both here in the USA sold as Eureka and in Europe where the units are sold under the Electrolux label (Electrolux Model ZCV785) in many countries including Sweden, UK and down under in Australia.

In the USA the Aggresor is coupled with Electrolux's most powerful two stage 7.2" tangential bypass motor system, the Ametek-Lamb 122031-12. Ametek makes this motor for many Electrolux central vacuums including the Electrolux PU3900B , the Beam 395 & 3900 models and the Honeywell H803 power unit along with many others. The 122031-12 has maximum performance ratings of 640 Airwatts with 126CFM airflow and 137IWL suction strength. The Lamb motors are part of Ametek's Premier Series which use an all aluminum chassis with dual ball bearing armature (drive shaft).

Aggresor A11 Central Vacuum Power Unit The Aggresor A11 is a true central vacuum style tangential by-pass design. While some smaller models have a single fan Cinderson brand thru-flo motor which uses the vacuumed air to also cool the motor, the AGG-A11 ejects all vacuumed air through the exhaust horn and out of the vacuum. A secondary fan at the opposite end of the drive shaft is used to cool the motor using clean air from around the power unit. The cooling air is brought in through the top of the vacuum's intake baffel and exhausted out the side vents.

Bypass motors enjoy a substantially longer life than thru-flo motors in central vacuum systems and do not suffer from performance robbing build up inside the motor system. The power and performance is impressive in the Aggresor A11 power unit and coupled with the large capacity VALOX chassis gives the A11 an extraordinary manufacturers suggested cleaning area of 12,000 square feet.

Like all manufacturers suggested ratings this is an optimal maximum. The 122031-12 motor is exceptional and provides superior performance for most applications with runs of 200 feet and sometimes more. The max tube run is the distance to the farthest inlet from the power unit plus the exhaust system, if any. This will allow for high performance usage in homes of 3,500 sqft up to 6,500 sqft. Installation and performance may vary based on the type of system, the type of floors and the homeowners preferences.

The A11 is an intelligent power unit and features a unique control system with LCD user interface. Like all central vacuum control boards the ECS (Electrolux Control System) provides switching for the main power and a relay + transformer to run the low-voltage inlet sensor system. The ECS is a reliable printed multi-layerd circuit board that also includes a 6 foot detachable power cord, low-voltage terminals, a power over-ride switch for manual activation and a set of scroll and selection buttons. The ECS also features a user resettable overload protection system that protects the motor system from voltage and thermal overloads.

The ECS is connected to the Message Center LCD to provide you valuable information about your vacuum system on the LCD panel with easy to use icons. Four screens provide information about the vacuum system and are accessable by scrolling though the menues using the buttons above the diplay. The home screen shows the Aggresor logo while the unit is not in use. The logo image may scroll to prevent image retention.

  Performance Indicators
Power unit motor is operating at peak or optimum performance when all four power bars are illuminated. Normal operating performance is when three to four bars are shown. Fewer bars will be illuminated if performance decreases. If fewer than two bars are consistanly illuminated the owners manual provides sevral areas to check. The display will illuminate operating performance during normal operation.
 
  Life Meter
The Hours of Service Indicator tracks machine usage with 8 bars. This system helps you keep track of the hours your system has been operating so you can best judge when your vacuum may require a tune up or a general cleaning/servicing may be warranted. The full 8 bars will measure 65 hours of run time. The power unit will continuie to operate beyond the measure of the Life Meter which can be reset by a service technician.
 
  Full Bin/Bag Indicator
Every 25 hours of use the Empty Bucket indicator will flash on the screen. This is an indication to empty the collection bin or replace the optional disposable bag. Since the indicator is time based you may find the bin too full or too empty depending on the service load of your home. If you have more people or pets, or use the vacuum to clean large debris or workshop areas you may want to check the bin more often. You can reset the bucket empty indicator by pressing the return key on the control panel.
 
  Call for Service Indicator

The Call For Service Indicator will light if there is a system fault or malfunction with your power unit. If the service symbol is displayed first unplug the unit for one minuite and plug it back in to reset. If the service symbol reappears we reccomend you call the toll free service numer for Electrolux.

The ECS and Message Center display provides valuable insight to the performance of your vacuum system and will help you to get the most from your vacuum system with the ability to diagnose any performance issues directly on the vacuum. The Message Center will help you to keep your vacuum operating at peak efficiency for thorough and deep cleaning performance. With the added benefit of knowing when your vacuum needs to be serviced you will not have to pay for unnecessary service calls or tune-ups for your vacuum system and you can often diagnose and correct limited performance issues yourself without hiring a professional.

With increased power often comes increased motor noise but the Aggresor A11 does an excellent job at taming its acoustical emissions and providing a low 61dBa noise level rating. Along with foam in the motor compartment for airflow regulation and noise diffusement, structural closed cell foam is used to isolate motor noise and vibration from the motor chassis. The motor compartment is further spearated from the outside enviorment with an aiflow intake baffle which redirects the motors cooling airflow intake which acts like a muffler to prevent motor noise from escaping to the outside environment.

Aggresor also includes an Sound-Off exhaust muffler system for the A11 to reduce output noise up to 50%. The exhaust muffler uses a foam lining to diffuse the loud roar of exhausting air so the system makes considerably less noise. The A11 is suitable for both self-venting applications where the exhaust is vented at the unit, or to a ducted exhaust system where the exiting air is sent through a tube system to vent outside the home for the ultimate in low-noise cleaning.

The A11's exhaust port is located in the upper third of the vacuum body on the right side (with unit mounted on a wall in front of you). The standard tube connector allows you to run the exhaust up or down, or straight out if you prefer. Accessories included with the unit have all the components you need to attach the exhaust muffler to the vacuum unit including an elbow with clamp connection that locks onto the Sound-Off muffler.

The vacuum unit's intake is located in the lower mid secion of the power unit on it's right side. The intake port connects with standard 2" vacuum tube using a glueless connection for easy service. If required an optional sweep-tee fitting and a utility inlet can be ordered with the vacuum system for cleaning directly at the unit. The CV5586W utility inlet is wired for low voltage and allows you to control the power unit directly from a switched hose. You can also use the over-ride switch on the vacuum control panel to turn the system on manually.

In most systems a utility inlet is remotely mounted which allows you to install the power unit in a convenient place in the garage or basement that is out of the way and out of weather. With a remote utility inlet you can have cleaning access near your garage door for example which will allow you to vacuum a car inside the garage and one in the drive from just one inlet while your vacuum is mounted elsewhere. The HP3990W automatic utility inlet is surface mount and an excellent choice for remote utility inlet.

One feature that increases performance and often the central vacuum users satisfaction is the ability to use a disposable bag collection system. This images shows a similar model that is orange in color with a deposable bag connected to the intake port. The Aggresor A11 features a standard bagless collection system with a Triumph HEPA media permanent filter system, with an included disposable bag option. When coupled with the large 8 gallon collection bin, the large surface area cone shape permanent filter system separates the dirt, dust and debris from the air. As airflow is pulled through the Triumph HEPA fabric media the vacuumed soils are dropped into the collection bin below.

As the bin fills it is easy to monitor the debris level using the built in window and know when the vacuum cleaner needs to be emptied. Removal of the bin is easy with a twist-lock closure system that is easy to remove and transport with easy grip handles on each side of the collection bin canister. Bagless collection is the preferred method for some and uses no consumables. When the unit is full or system performance decreases (as indicated on the Message Center LED) you need only dump the collection bin and occasionally clean the permanent filter.

For those that do not want, or can not use a bagless collection system Aggresor provides a disposable bag connection system that is easy to install and can be removed at any time. Included with each unit is a PVC elbow with tabs on one end and a notched hub on the other. By connecting this elbow inside the vacuum unit you can use disposable collection bags to hygienically dispose of vacuumed debris.

Using either standard paper bags or high performance synthetic bags the AGG-A11 bagless system can be switched to a permanent filter vacuum with disposable collection that is convenient to use and allows installation of the system into areas that would not be appropriate for a bagless model including an inside closet, utility room or finished basement where maintenance of a bagless unit may be too messy.

The disposable bag adaptor is simple to install and the unit can be switched from bagless to bagged, and back again if needed. Using disposable bags both increases overall performance of the vacuum system and also eliminates the periodic requirement to clean the permanent filter.

Mounting the Aggresor A11 is simple. A metal mounting bracket is included to attach the power unit to a wall. Using the included screws the vacuum power unit's mounting plate can be attached directly to a stud on a sheetrock wall. Use optional plastic or metal anchors if the unit needs to be mounted to a masonry wall. The power unit slides into the cleats of the mounting bracket for a snug and secure fit that also allows for easy removal should it be needed. The Aggresor A11 measure 38.5" tall with the collection bin attached and closed.

The vacuum body is 14" in diameter with a slight taper at the top and 16" across in the center where the handles are located on each side. You should allow a minimum 12" of space from the ceiling above the unit for proper cooling. A 12" space is also recommended on each side of the unit to allow easy connection to the tube system using large radius elbows and to also provide space for easy collection bin removal. A minimum 28" of space is recommended below the power unit so the collection can be dropped down for removal. The intake port is 7.75" from the wall to center and 23" from the top of the unit.

The exhaust port is 8" from the top on the right side of the power unit and is connected with an elbow that allows rotation up or down. As with all central vacuums the AGG-A11 should be mounted in an easily accessible area which is not confined and/or heat producing, such as an attic. The universal 24V low-volt inlet signal system works with all brands of inlets and all brands of attachment sets. Both intake and exhaust connections are for standard 2" vacuum tube.

Each AGG-A11 power unit includes:
  • Mounting Bracket
  • 6ft Detachable Power Cord
  • (2) stud mounting screws
  • Disposable Bag Adaptor
  • 90° Elbow (black, for exhaust system)
  • Sound-Of Muffler (black, for exhaust system)
  • Metal Hose Clamp
  • (2) Screws & Nuts (for muffler connection)
  • Owners Manual
  • LCD Instruction Supplementel
 

AGGRESOR AGG-A11 POWER UNIT SPECIFICATIONS & FEATURES
  • Central Vacuum Power Unit
  • Upto 12,000 sqft Cleaning (Mfg. Sug)
  • 2 Stage 15. Amp 120V Motor
    • By-Pass 7.2" Tangential Exhaust Design
    • 126 Cubic Feet / Minute Airflow
    • 137 Inches / Water Lift Suction
    • 640 Max Air Watts
  • Electrolux Control System
  • Message Center LCD Display
  • Detachable 6ft Power Cord
  • LED Power Indicator
  • Voltage & Thermal Overload Reset
  • Manual Override On Switch
  • Bagless and Bagged Collection Option
  • 8 Gallon Bin Capacity
  • Transparent Window Collection Bin
  • Twist-Lock Bin Connection
  • Self Regulating Permanent Filter
  • Triumph HEPA Filter Material
  • Hygenic Disposable Bag System Optional
  • Sound-Off Exhaust Muffler Included
  • Muffler Connection's Included
  • Vertical Exhaust (down or up)
  • Bi-Directional Intake System (left or right)
  • Low Noise 61dBa Design
  • Air Noise and Vibration Reduction System
  • Metal Mounting Brack w/screws
  • 100% Valox Chassis
  • Built-in Scratch Resistant Color
  • Black Powder Color
  • 32lbs Total Weight
  • 38.5" High, 14" Diameter
  • OEM Model CV7520A, P/N 008442
  • Vacdepot, Electrolux Authorized Dealer


A Vacdepot Original Product Review. ©2011 Vacdepot Inc.  

Similar Items to AGG-A11 Smart Performer Pro Power Unit April 2014

® Performer Plus Power Unit
Aggresor Vacuums® AGG-PU298

Performer Plus Power Unit
[More Info]
® Quiet Pro Power Unit
Honeywell 4B-H803

Quiet Pro Power Unit
[More Info]
® Large CVS Power Unit
VALET® ATQ-1500

Large CVS Power Unit
[More Info]
® Serenity IQS
Beam® 3980A

Serenity IQS
[More Info]
® Serenity QS
Beam® 398C

Serenity QS
[More Info]
® Quiet Clean Intelligent Power Unit
Electrolux® PU3900

Quiet Clean Intelligent Power Unit
[More Info]
 
  Sunday | 20th April, 2014 Vacdepot Online since 27 December 1995   

Vacdepot VDTA Member
info@vacdepot.com | 888-822-8863 | Home Page | The Suction Blog
Conditions of Use | Security & Privacy Notice © 1995-2014, Vacdepot, Inc.